PICTOS/R is a unique combination of high speed image analysis with powerful dry dispersion
optimised for on-line applications: up to 175 fps with 2048x2048 square pixels, 1 ns exposure time,
displayed: PICTOS/R with dosing unit VIBRI/L.

Technical specifications and dimensions.

PICTOS/R combines the powerful dry dispersion of the RODOS with the high speed image analysis of QICPIC/R in a single robust instrument, specially designed for on-line applications in the process environment. PICTOS/R can directly operate in combination with the representative sampler family TWISTER, sampling probes, the MIXER or user supplied samplers.

Like QICPIC/R it combines innovative new techniques: A powerful, well established dry dispersion unit, which guarantees proper dispersion of agglomerated fine and cohesive powders down to below 0.1µm; a pulsed light source with an extremely short exposure time of less than 1 ns which enables clear cut images from fastest particles created by the dispersion process (100m/s would result in only 100 nm of motion blur); a high speed camera suitable to measure up to 175 images per second for high statistical relevance of the measured results and short analysis times.

PICTOS/R covers particle sizes between 4.2 µm and 3.5 mm in two measuring ranges. The primary measurement data is stored in 100000 primary classes and can be evaluated in individually definable formats. Pre-defined sets of size classes allow an easy adoption to existing measurement specifications.

The WINDOX software offers simultaneous calculations of all relevant size and shape characteristics. A particle gallery in combination with multiple filter functions supports the evaluation of specific results, even if very large amounts of 10 million particles or more are stored.

PICTOS/R fulfils the security requirements of the FDA and is compliant to 21 CFR Rule 11.

Highlights of PICTOS/R

	Particle size and shape analysis from 4.2 µm to 3,500 µm.
	Direct co-operation with the representative sampler TWISTER, simple sampling probes or the MIXER.
	Efficient dispersion instead of software-based particle elimination or correction.
	Quasi-static image analysis in a high speed particle stream.
	Clear outline of particles, independent of the position in the measuring zone.
	Definite borders of particles, black outline, transparent particles are no problem.
	Very low statistical errors due to very high particle numbers.
	User defined class limits out of 100000 primary size classes, free definition of sampling points, pre-defined sets of class limits are shipped with the software (e.g. HELOS classes, sieve classes, etc.)
	A large number of evaluation modes are available, evaluation modes are selectable even after the measurement: particle size: basing on equivalent projected circle area, Feret diameters, etc. particle shape: sphericity, aspect ratio and convexity fibre evaluation: fibre length, fibre diameter, straightness, and elongation even of complex structures. particle gallery: displays and prints a user defined selection of particles along with definable characteristic data user specific evaluation: performs the evaluation of particle size and shape only on particles matching user defined filter conditions.
	PICTOS/R fulfils the security requirements of the FDA and is compliant to 21 CFR Rule 11.

For image analysis applications in the laboratory (off-line) please refer to QICPIC.